Monday 15 November 2021

Merry Monday, Some Pastel Christmas BA Inspiration

Good morning, Julie here with a little bit of festive inspiration. I've been wanting to try the floating strip technique for awhile and decided to turn the end result into a Christmas bauble. I originally thought of a simple circular one but in the end I used a really ancient bauble die as well!

Here are my two cards. 


The technique is the same whether you use a basic circle die or a more complex shape die to create your bauble. All you need is a piece of acetate slightly larger than your die and some strips of card!
To make mine, I used Background Builders Christmas and Background Builders Christmas 2018 and a variety of pastel coloured card for a non traditional look. Some elements I heat embossed with white EP, others I simply stamped with ink. You could just use some bits of DP as well.
Using double sided tape I added the strips to my acetate background, leaving a small gap between each one. I used some scrap acetate that was from an old brochure, you don't need the good stuff. When covered, I trimmed off the excess.


Then, using a circle die I cut into the acetate panel, a couple off passes might be needed depending on the thickness of the acetate. If it doesn't work after a couple of runs through your machine repeat or remove the die and carefully run a pair of scissors around the impression to free the die cut.


I repeated these steps to create the decorative bauble die also and added a fixing using the matching die in silver and a cut down one from another die for the plain circle one.


Once I had completed each bauble I was ready to create my cards. After a bit of toing and froing, I used a Gelli plate background using the Let it Snow stencil for one and kept the other plain.


I used a 51/2" square base card, matting the stencilled background on some silver paper before adding the bauble. I used pads down the middle and glue along the edges to give it some shaping. A simple silver chord bow and a trimmed and fussy cut, white, heat embossed sentiment from Christmas Wishes on black completes. I fussy cut the sentiment as I wanted it to look a little lighter than using a solid sentiment panel.

My second card has the bauble attached as before but onto a linen effect, white, A6 note card and a simple stamped sentiment.



So that's all from me. I hope I've given you an idea to help you make your Christmas cards. I think I'm almost there with my Christmas makes but there are always last minute ones to make!

Stay safe out there 'til next time and keep crafting.

3 comments:

  1. What a clever idea and the end result is super! A great way to use up those little bits too! Brilliant cards...and a gelli plate background as well!

    ReplyDelete
  2. So inspirational, a unquiet and contemporary idea and I love them x.

    ReplyDelete
  3. Beautiful cards Julie. Lovely colours and a great technique. X

    ReplyDelete

Lovely Comments Appreciated